How to properly install window and door seals?

The correct installation of door and window seals is very important, can effectively prevent the wind and rain dust into the interior, improve the thermal insulation performance of doors and windows and sound insulation effect. Below I will describe in detail how to properly install door and window seals:

1. Prepare tools and materials:

Installation of sealing strips need to prepare the required tools and materials, including sealing strips, rulers, scissors, rubber hammers, cleaning cloths and so on.

2. Measure the size:

First of all, you need to measure the size of the doors and windows to make sure that the length and width of the sealing strips purchased meet the actual size of the doors and windows. You can use a ruler to make accurate measurements, and then cut the sealing strip according to the actual situation.

3. Clean the surface of doors and windows:

Before installing the sealing strip, clean the surface of the doors and windows to ensure that the surface is clean and dust-free. You can use a cleaning cloth to wipe the surface of the doors and windows to remove dirt and debris.

4. Installation of sealing strip:

Fit the cut sealing strips along the edges of the door or window and tap them gently with a rubber mallet to make them stick firmly. The sealing strip should fit tightly along the edge of the window or door to ensure that there is no gap.

5. Adjust the sealing strip position:

During the installation process, the length may be insufficient or too long, at this time you need to use the ruler to measure again, cut and adjust the length of the sealing strip as needed.

6. Check the sealing effect:

After the installation is completed, the sealing strip should be checked to ensure that the sealing strip is tightly fitted and there is no loosening or falling off. At the same time, you can use your hand to gently pull the sealing strip to check whether it is firm.

7. Regular inspection and maintenance:

Door and window sealing strips are wearing parts and need regular inspection and maintenance to ensure their sealing effect and service life. If there is any damage or aging, replace the sealing strip with a new one in time.

The above is the correct way to install door and window seals, hope it will help you. When installing seals, pay attention to details and operate carefully to ensure the sealing effect and service life. If you are not sure or have difficulties, it is recommended to ask a professional to do the installation to avoid unnecessary losses. Wish you a smooth installation!