Tread Bar

How is the product maintained and stored after use? Next I will take us all to understand more product knowledge. Hope that when we use to bring you help.

Improper loading and unloading in the process of maintenance and cleaning is the main reason for damage to the mold. Therefore, the mold should be disassembled and cleaned up at the same time by dedicated personnel to complete, die head in the disassembly and cleaning should be used when the copper devices. Die head assembly surface, can be fine oil stone or metallurgical sandpaper cleaning. Before assembling the molds, the runners should be polished to low roughness with metallographic sandpaper and coated with a thin layer of silicone ester to ensure protection against gas and water corrosion during long-term storage. During assembly, all bolts, screw bearing surfaces and threads must be coated with high temperature grease (7020). Sizing mold in the disassembly, care should be taken to avoid collision; installation, should be arranged in accordance with the type plate sequence number installation. Tank in the daily maintenance should ensure that the shaping block is loaded after the four sides to leave a proper adjustment of the activity space. Extrusion mold storage, molds should be stored in a dry, clean and ventilated warehouse, is strictly prohibited and corrosive products stored in the same warehouse;, mold use is completed, must be cleaned up and reassembled. After the oil seal, stored in the warehouse; molds should be stored in a special mold storage rack, to ensure that the placement is safe and easy to access.

The above content is our shaped plastic extrusion mold for the introduction of relevant knowledge. I believe we all have a better understanding of our products. Its maintenance and storage methods are very important. If you are interested in our products, you can always call our hotline to contact us.