产品展示

产品展示

current position: Home > Product Center > PP

Contact usContact Us

Suzhou HuiYuFa Precision Mold Co.

Contact: Mr. Yu

Handphone:+86 136 3634 2341

Tel:+86 0512-63937361

Address:www.shwenzhi.com

Address:No.16 East Concentric Road, Awanping Community, Songling Town, Wujiang District, Suzhou, Jiangsu, China.

ABS Products

ABS Products

  • Category:PP
  • Browse number:205
  • QR code:
  • Release time:2021-07-15 18:31:53
  • Product description

Correct use of plastic pipe production equipment, can avoid danger to the operator, but also to avoid problems with the equipment, so that you can better use of plastic pipe production equipment, to bring greater benefits to users.


Plastic pipe production equipment in the installation, commissioning (mold, adjust the blade gap) or dismantle the mold, need to be familiar with the equipment by the personnel in accordance with the prescribed procedures, we should always check the mold blades and the sharpness of the blade, if you find that the blade becomes blunt, we must promptly repair or replace, change the mold must stop the operation in order to avoid the occurrence of danger.


Do not put your hands or body parts between the upper and lower die holders (blades), any sundries and tools should not be placed on the workbench to avoid accidents, because the plastic pipe production equipment can be operated by more than one person, so you need to have a special person to direct the production, the operation of the workpiece, holding the workpiece waiting for the slider to drop down, it needs to be very careful, according to the thickness of the copper rows (or aluminum rows) to choose a good shear blades and die gap and bending fillet radius.


Keep the oil clean and the oil circuit unobstructed, every shift should be lubricated for each unit of moving parts, electrical and hydraulic components to ensure that the action is flexible, accurate positioning, abnormalities found to stop the operation of the inspection, in order to extend the service life of the PVC pipe production line, the general requirements to avoid the sun and other heat radiation, to avoid excessively humid, too much dust or corrosive gases, it is easy to make the electronic components subjected to Corrosion, deterioration, resulting in poor contact or short circuit between components, affecting the normal operation of the equipment.


Operating procedures is to ensure that the production of plastic pipe production equipment production of one of the important measures, production personnel need to strictly comply with, the operator in the event of failure, should pay attention to keep the scene clean, and maintenance personnel in the failure of the pre-failure and post-failure of the truthful description, in order to facilitate the analysis and diagnosis of the cause of the failure, troubleshooting in a timely manner.


Tags

Previous:ABS Products2021-07-15
Next:ABS Products2021-07-15
  • 菜单
National Service Hotline

+86 136-3634-2341

Contact: Mr. Yu

Cell Phone:+86 13636342341

Telephones:+86 0512-63937361

Web Address:www.shwenzhi.com

AddressNo. 16, East Concentric Road, Yuanping Community, Songling Town, Wujiang District, Suzhou, China

底部二维码

Scan a Code

Copyright © Suzhou HuiYuFa Precision Mold Co. All rights reserved
Powered by Xiangyun Platform Technical Support: Xiangyun platform