Foam Mould

In the production process, regardless of the level of processing plant, may face the problem of mold parts rust, in order to avoid rust in the process of production and transportation on the situation, high quality mold parts factory will be based on their own processing technology out of a certain program to prevent the occurrence of rusty parts, where to buy mold parts rust solutions are?

1, decomposition of the gas produced

Some mold parts in the process will produce a certain volatile gas, and these gases are mostly corrosive, these corrosive gases will have a certain impact on the accessories, corrosion or rust, so after the completion of the process to stop the mold parts production equipment in a timely manner, decomposition of the gas produced or discharge these gases in a timely manner, and then coated with rust inhibitor!

2, dry cooling water

Professional mold fittings processing enterprises will have special workers to be responsible for wiping off the cooling water, fittings production process due to high temperatures, must be prepared to a certain amount of cooling water to allow fittings to instantly cool down, but cooling will produce water vapor, these water vapor for a long time to infiltrate the fittings will cause oxidative rust, so timely drying of the cooling water or will be excess water droplets wiped away is also a way;

3, remove carbide

Mould parts production on the way, due to a long time equipment enabled, the production of accessories will be more or less mixed with some production of carbide, these carbide reaction in the air and adhere to the mold will cause mold corrosion, so mold parts processing plant if you find that the production of accessories on the emergence of carbide, you should promptly remove these carbide and clean up the equipment.