Foam Mould

Mould accessories in the use of phi seal, aluminum skin should be cleaned up in a timely manner to prevent extrusion mold.

In the mold use, often because of various reasons mold will appear phi seal, aluminum skin, this time must clean up in time, otherwise continue to produce will be extruded mold. Especially the slide part, if the slide into the aluminum skin, etc., due to the die casting machine clamping force is very large, will be the slide will be extruded, extrusion bad. Therefore, encountered this kind of problem, must clean up the mold in time, and find the cause of the mold timely repair. Otherwise, when the mold is damaged before repair, it will seriously affect the mold life.

Try to reduce the aluminum pouring temperature, improve the service life of the mold.

Die casting production of aluminum pouring temperature, not only affect the casting quality, also affect the service life of die casting die parts. General die-casting, aluminum pouring temperature in 630 degrees -720 degrees, for different parts, we in the choice of pouring temperature, should try to choose some lower, this not only saves energy, at the same time can also prolong the service life of die-casting mold parts. Because the higher the temperature of the aluminum liquid, the greater the erosion of the mold, the greater the range of mold temperature field changes, the greater the thermal expansion and contraction, the greater the fatigue of the mold, the easier it is to damage. Therefore, appropriately reduce the aluminum liquid pouring temperature, beneficial to extend the service life of die-casting die parts.