Furniture edging

Advantages of furniture edging strips:

One: Furniture edging strips are relatively light, which is relative to metal and plexiglass, the reason for light is not because it is a polymer compound, but because they are organic compounds, i.e., they are composed of lighter elements such as carbon, hydrogen, oxygen and nitrogen.

Second: the material of furniture edge banding is plastic, plastic is easy to process. Plastic has plasticity, that is, deformation after heating or pressurization, and maintain the original shape after cooling or pressure disappears. It can be processed into the respective shapes of edging strips through extrusion, such as T-shaped edging strips, H-shaped edging strips, D-shaped edging strips, V-shaped edging strips, I-shaped and so on.

Third: furniture edging strip quality and low price, and plastic price fluctuation is far from metal.

Furniture edging strip good or bad:

1, look at the edging strip color and surface roughness, good edging strip surface color is also very important, whether the color is close to the customized product, gorgeous. If the surface is very rough, there are pull marks that the quality is certainly not good, this is the surface quality of the sealing strip. With the edge of the inner material is not too good or bad, mainly is the edge of the production process and the production of technical skills of the staff of the factory. Good edge band is: the surface shall be smooth, no blistering or very little blistering, no pulling or very little pulling, moderate gloss, can't be too bright or too matte (unless there are special requirements).

2, look at the edge of the strip surface and bottom flatness, thick bushes are uniform, otherwise it will lead to the combination of the edge of the strip and the plate, the glue line is too eye-catching or plate and the edge of the strip between the gap is too large to affect the overall beauty. Details determine success or failure, often a small detail problem, may bring the overall effect of the embarrassing situation.

3, edge trimming is white, bending edge strip surface is white serious, edge strip trimming color is close to the surface color of the plate in the difficult. pvc edge strip is mainly pvc and calcium carbonate plus additives made, if the calcium carbonate content is too high, there will be edge whitening, bending white phenomenon, proving that this kind of product quality is not good.

4, whether the strength is still available, there is no elasticity, strong high means good abrasion resistance, the corresponding quality is also the better, the strength is too high also means that the processing difficulty increases. Elasticity is not high means wear resistance is not high, low aging resistance. According to the actual production needs, generally need to be hand trimmed, can be appropriate to do a soft point, automatic sealing machine can be appropriate to do a hard point.

5, whether the backing glue on the uniform, in the use of the process is easy to fall off.

6, smell PVC edging strip there is no flavor, the use of good quality raw materials produced by the general flavor of the product is small, if the flavor is too big, that means the production of raw materials used in poor quality.

7, look at the PVC edging strip surface and bottom flatness, thick bushes are uniform, otherwise it will lead to the combination of edging strips and plates, glue line is too striking or plates and edging strips between the gap is too large to affect the overall beauty. Details determine success or failure, often a small detail problem, may bring the overall effect of the embarrassing situation.