Furniture edging

Two-color edging strips in the process of using may appear some small problems, some are not enough experience in the operation of workers, some are sealing the edge of the time did not control the temperature and temperature, etc., then in the process of sealing the edge of the process if it has been sealing can not be what causes it, the following let the manufacturers of furniture edging strips for you to talk about.

The use of edge banding process, if the phenomenon of sealing, please check whether the temperature is normal, whether the speed of sealing is too slow, whether the use of environmental room temperature is lower than 8 degrees. If the glue line is too heavy, or there is overflowing glue pulling phenomenon, please adjust the speed of the edge sealing machine, hot melt adhesive temperature adjustment does not improve, then please replace the appropriate model.

Check whether the surface of edgebanding is smooth and flat, and whether there are any dots. If there is any spot or pinhole, it may be made of recycled PVC. Check if the back of the edgeband is flat. Can use a leveling blade across the edge of the card to see if it is a straight line, such as not a straight line will appear on both sides of the edge after sealing a very thick glue line. If the back of the sealing strip is flat, after sealing still appear very thick glue line can be checked according to the following methods: check whether the saw surface of the plate is flat. If the specification of upper and lower saw blades is not the same when sawing the board, then there are small steps on the sawing surface, which will affect the sealing edge. Check whether the hot sol glue is too thick. Check whether the thickness and pressure adjusted by the sealing machine are coordinated. Use a small section of edging strip to seal the edge, and then tear it off with force to check whether the adhesive strength of edging strip and hot solvent is reasonable and even.

Edge banding is a very good material that can help us play a protective role, bringing great use and benefits to human life. There are many kinds of edging strips, each with different uses and advantages, mainly based on consumer demand to choose.  U-type edge sealing strip cross-section is u-shaped, the body of the cross-section of the two sides of the vertical edge of the inner corner of the rounded corner or the angle of the ramp. Because it has three internal contact cross-section, can be effectively wrapped in the opening of the cabinet board, at the same time three internal contact surface and cabinet board opening end face and two sides can be very good fit together, and can be used directly to paste fast drying adhesive. This way you can do furniture on all three sides are protected, and also has the effect of moisture resistance, the material of this edge sealing strip is relatively soft material.