Vacuum Injection Hose

Vacuum injection hose is a device used in industrial production and is commonly used in glue injection operations. Its main function is to pump the glue out of the container and transport it through the pipeline to the desired location for gluing. However, due to prolonged use and poor operation, vacuum injection hose may have some common problems. The following vacuum injection hose sales will introduce some common problems and their solutions.

1. Vacuum hose rupture:

The vacuum injection hose may be ruptured due to long time use, material aging or external impact. The solution is to replace the hose with a new one in time, or use adhesive tape to seal the hose.

2. vacuum injection tube leakage:

Leakage may be caused by poor connection of the hose or wear and tear of the piping material. The solution is to check whether the connection of the hose is tight, if there is any problem, adjust or replace the connection in time; in addition, regularly check whether the material of the hose is worn, if there is wear and tear in time for replacement.

3. Vacuum injection hose pressure instability:

Unstable pressure may be caused by unstable pressure of gas source, clogged pipeline or loose connection of gas source. The solution is to check the stability of the gas source, if there is a problem, you need to adjust the pressure of the gas source; at the same time, check whether the injection tube is blocked or firmly connected.

4. Vacuum injection hose leakage:

Leakage refers to the phenomenon of a small amount of glue leaking from the injection hose during use. It may be caused by loose connection of the hose, unsealed interface or worn hose. The solution is to check whether the connection of the injection hose is tight, if loose, timely adjustment; at the same time, check whether the injection hose interface sealing, if there are problems can be repaired using sealant; in addition, regular inspection of the injection hose wear and tear, if there is wear and tear in a timely manner to replace.

5. Vacuum injection tube resistance increases:

Increased resistance may be due to the injection hose internal accumulation of glue, injection hose diameter is too small and other reasons. The solution is to regularly clean the hose to remove the internal glue buildup; in addition, if the diameter of the hose is too small, consider replacing the hose with a larger diameter.

6. Vacuum injection tube suction capacity decline:

Decrease in suction capacity may be due to the connection part of the injection hose is blocked by foreign objects or the glue is too turbid and other reasons. The solution is to check whether there are foreign objects blocking the connection part of the hose and remove the foreign objects; at the same time, replace the glue regularly to avoid the glue being too turbid and affecting the suction ability.

7. Vacuum injection hose aging and hardening:

After a long time of use, the material of the injection hose may be aged and hardened, resulting in inconvenience. The solution is to regularly replace the hose with a new one to avoid the problem of aging and hardening.

8. Vacuum injection hose connections are loose:

During use, the hose connection may loosen due to vibration or improper operation. The solution is to regularly check whether the connection part of the injection hose is tight, if loose, timely adjustment.

In short, the vacuum injection tube may face some common problems in the long time use process, these problems may lead to the waste of glue, and even affect the production efficiency. Therefore, it is very important to find and solve these problems in time. As long as regular inspection and maintenance, reasonable use of vacuum injection hose, avoid bad operation, you can ensure the normal operation and long-term use of vacuum injection hose. Vacuum injection hose sales