产品展示

产品展示

current position: Home > Product Center > Furniture Edging

Contact usContact Us

Suzhou HuiYuFa Precision Mold Co.

Contact: Mr. Yu

Handphone:+86 136 3634 2341

Tel:+86 0512-63937361

Address:www.shwenzhi.com

Address:No.16 East Concentric Road, Awanping Community, Songling Town, Wujiang District, Suzhou, Jiangsu, China.

Furniture edging

Furniture edging

  • Category:Furniture Edging
  • Browse number:16
  • QR code:
  • Release time:2021-07-19 16:09:25
  • Product description

The methods to judge the good and bad of the two-color edgeband are as follows:


1, look at the furniture edge sealing strip color and surface roughness, good edge sealing strip surface color is also very important, whether the color is close to the customized product, colorful. If the surface is very rough, there are pull marks that also the quality is certainly not good, this is the surface quality of the sealing strip. With the edge of the inner material is not too good or bad, mainly is the edge of the production process and the production of technical skills of the staff of the factory. Good edge band is: the surface shall be smooth, no blistering or very little blistering, no pulling or very little pulling, moderate gloss, can't be too bright or too matte (unless there are special requirements).


2, look at the sealing strip surface and bottom flatness, thickness is uniform, otherwise it will lead to the combination of sealing strip and plate, glue line is too eye-catching or plate and sealing strip between the gap is too large to affect the overall beauty. Details determine success or failure, often a small detail problem, may bring the overall effect of the embarrassing situation.


3, edge trimming is white, bending edge strip surface is white serious, edge strip trimming color is close to the surface color of the plate in the difficult. pvc edge strip is mainly made of pvc and calcium carbonate plus additives, if the content of calcium carbonate is too high, there will be edge whitening, bending white phenomenon, proving that this kind of product quality is not good.


4, whether the strength is still available, there is no elasticity, strong high means good abrasion resistance, the corresponding quality is also the better, the strength is too high also means that the processing difficulty increases. Elasticity is not high means wear resistance is not high, low aging resistance. According to the actual production needs, generally need to be hand trimmed, can be appropriate to do a soft point, automatic sealing machine can be appropriate to do a hard point.


5, whether the backing glue on the even, in the use of the process is easy to fall off.


6, smell pvc edge sealing strip has no flavor, the use of good quality raw materials produced by the general flavor of the product is small, if the flavor is too large, it means that the production of raw materials used in poor quality.


Tags

Previous:Furniture edging2021-07-19
Next:Furniture edging2021-07-19
  • 菜单
National Service Hotline

+86 136-3634-2341

Contact: Mr. Yu

Cell Phone:+86 13636342341

Telephones:+86 0512-63937361

Web Address:www.shwenzhi.com

AddressNo. 16, East Concentric Road, Yuanping Community, Songling Town, Wujiang District, Suzhou, China

底部二维码

Scan a Code

Copyright © Suzhou HuiYuFa Precision Mold Co. All rights reserved
Powered by Xiangyun Platform Technical Support: Xiangyun platform