Furniture edging

Advantages of Furniture Edge Banding.

1, natural wood grain, soft, invariant, strong adhesion characteristics when pasting.

2, wood edging strips and furniture panels bonded adsorption is good, especially with wood panels bonded in one.

3, wood veneer edgebanding strips and non-woven fabrics fit tightly, not hairy, flexible, wood veneer high elasticity, wear resistance, moderate gloss, surface sanding, flat, smooth, convenient for customers to use.

Disadvantages.

1, art quality sealing strip due to easy to break, so the moisture content is generally controlled at 8% ~ 12%, for curve sealing, then you need to control between 15% - 20%, in order to increase the flexibility of the sealing strip.

2, the workpiece edge sealing also needs to be sanded and coated with paint and other processes.

3、Wooden edge banding is mainly applied to the sticking and decorating of the edge profile of solid wood furniture panels, which can only be completed by hand-pasting method in operation.

4、Because wood is hygroscopic material, its water content will be affected by the external temperature, humidity and changes, therefore, the choice of adhesive should be based on seasonal changes and moisture diffusion and penetration requirements.

Plastic edging strips made of polypropylene or polyvinyl chloride as raw material, mechanically pressed into wood grain, translucent, plain color and two-color series. With heat resistance, oil resistance and strength, hardness, bending degree of high characteristics; its surface performance is good, wear-resistant, can be trimmed; surface effect is also good, its pattern and color can be close to the original natural wood color, but also other color patterns; the bottom side of the mesh treatment or coated with PVC edging strips bonding effect is also very good. Its specifications: thickness of 0.2 ~ 3mm, width of 19-50mm, length of 1000mm a volume. pvc edge sealing strip thickness of more than 2mm has a certain stress, the use must be heated to soften or increase the temperature of the binder, otherwise it will be due to the stress of the paste is not secure and fall off by itself.

Workmanship is relatively poor closet panels are usually processed with small domestic equipment, easy to show dramatic teeth, chipped edges, chipped holes and other phenomena. Their edges, usually more rough technology, edges and plates have a clear "border", the integrity is not strong, edges and boards have black lines between the presentation, corner edging junction is not flat, and even in order to save money only sealed to see the light side of an edge, plywood on the other three sides of the edges are not sealed.