Furniture edging

Two-color edging strip manufacturers to introduce several ways to identify the quality of edging strip:

1, pick up a furniture edging strip hard fold, the more not easy to break the quality of the better, the reason is that the calcium carbonate added inside less, so the product toughness and strength is better;.

2, smell there is no taste, the use of good quality raw materials produced by the general taste of the product is small, if the taste is too big, it means that the production of raw materials used in the poorer quality;.

3, look at the color, the general color is bright, the surface finish is relatively good, the darker the color, such as black, gray, etc. The possibility of using back to the material is relatively large.

PVC edging according to its color can be divided into, plain PVC edging, wood grain PVC edging. Vegetative color, means is often live in red, yellow, blue, green, etc., can be called the color, that is, the meaning of a single color. The upper layer is made of PVC material bottom layer over the bottom glue, plain color edging board first with a relatively simple, white plate on the choice of white edging strips, and so on. General color has a difference, so in adjusting the color, general manufacturers will have to ask customers to mention the base color (such as plate samples, plate color card, etc.). Wood grain color is the surface layer with paint printing paint, forming an effect similar to the wood veneer pattern. Wood grain color, the middle layer is PVC substrate, the surface layer is paint printing, the bottom layer is primer. The price of wood grain color sealer is slightly higher than plain color.

Temperature is an important factor affecting and limiting the quality of PVC edging strip, whether in the process of PVC edging strip edging treatment, or in the link that has been installed and used, temperature is a very important existence. If the temperature is not properly regulated and mastered, it will lead to the problems of PVC edge banding such as debonding and chipping.

Thickness is mainly based on the actual needs of customers to decide, the thicker the edge effect is more obvious, the more angle, the more grade. However, the thicker and higher thickness means the increase of cost. The shape of profiled edgebanding is different from that of flat board, unlike the flat board where the thickness and width can be found regularly, each of which has a different shape. The development of profile is mainly based on the customer's actual use of the needs of special development. Shaped is mainly used in furniture, door industry, automobile, train, chair and other industries, play the role of closure, decoration and so on. Shaped is much more expensive than flat because it is generally heavier than flat, the production volume is not high, and the production process is more troublesome.